How to Paint a Bathroom

To paint a bathroom, clean every surface with a mildew cleaner and let the room dry completely, remove the mirror and fixtures you can, caulk gaps around the tub and trim, spot-prime stains and patches with a mildew-resistant primer, then apply two coats of a satin paint labeled for bathrooms or high-humidity rooms. Paint the ceiling first, keep the exhaust fan running while the paint dries, and wait at least a day, ideally longer, before the first hot shower.
A small bathroom takes surprisingly little paint, often a gallon or less for the walls, but more care than any other room. Steam, temperature swings and frequent cleaning find every weak spot, which is why bathroom paint so often peels or bubbles when the prep is rushed.
How much paint does a bathroom need?
Bathrooms have less paintable wall than their size suggests, because tile, the tub surround, the mirror and the vanity cover a lot of it. We worked out three common sizes with 8 ft ceilings, one door, one window and a typical tiled tub or shower wall subtracted, using two coats and 10% for waste.
| Bathroom | Walls to paint | Wall paint, 2 coats | Ceiling paint, 2 coats |
|---|---|---|---|
| Small, 5 × 8 ft | About 123 sq ft | 0.8 gal: buy 1 gallon | 0.2 gal: buy 1 quart |
| Medium, 8 × 10 ft | About 193 sq ft | 1.2 gal: buy 1 gallon + 1 quart | 0.4 gal: buy 2 quarts |
| Large primary bath, 10 × 12 ft | About 237 sq ft | 1.5 gal: buy 1 gallon + 2 quarts | 0.7 gal: buy 1 gallon |
Tile coverage varies a lot from one bathroom to the next, so measure the painted wall area yourself if your tile goes higher or lower than a standard tub surround. The paint calculator lets you enter the room and subtract openings, and the ceiling paint calculator covers the ceiling.
What paint is best for a bathroom?
Three things matter more than the brand.
Sheen: satin. Satin resists moisture and stands up to repeated wiping far better than flat, matte or most eggshell paints. In a powder room without a shower, eggshell is fine. Semi-gloss is the toughest, but it shows every wall imperfection, so most people keep it for trim and doors. Our eggshell vs satin comparison explains the trade-off.
A paint made for humid rooms. Many paint lines include products labeled for bathrooms, kitchens or high humidity, formulated with mildew-resistant additives. They resist surface mildew on the paint film; they don’t fix a ventilation problem.
The right primer. Most previously painted bathroom walls in good condition need primer only over patches and stains. Use a stain-blocking primer over old mildew marks or water stains, and a bonding primer over glossy or old oil-based paint, which is common in older bathrooms. Our primer guide covers every case.
What you’ll need
- Mildew cleaner, sponge, bucket and gloves
- Screwdriver and labeled bags for fixture screws
- Mildew-resistant, paintable caulk and a caulk gun
- Spackle, putty knife and fine sanding sponge
- Primer (mildew-resistant or stain-blocking, as needed)
- Satin bathroom paint, plus ceiling paint if the ceiling differs
- A 2-inch angled brush, a 4-inch mini roller and a 9-inch roller with a 3/8 inch cover
- Painter’s tape and plastic to cover the tub, toilet and vanity
Step 1: Clean and dry the room
Bathroom walls carry soap film, hairspray, body oils and, often, mildew, especially on the ceiling above the shower and in corners. Paint won’t bond to any of it.
- Scrub mildew spots with a mildew cleaner, following the label, wearing gloves and with the window open and fan running. Never mix bleach-based cleaners with ammonia or other cleaners.
- Wash all the walls and the ceiling with mild soapy water to remove soap film, then rinse with clean water.
- Let the room dry completely. Don’t shower in it for a day before painting if you can avoid it, and run the exhaust fan for several hours.
If mildew returns quickly after cleaning, the room has a ventilation problem that paint won’t solve. Check that the exhaust fan actually runs, vents outdoors, and is used during and after every shower.
Step 2: Remove, repair and caulk
Take down the mirror if it’s hung on hooks, towel bars, toilet paper holder, shelves and light fixture covers, and put each set of screws in a labeled bag. Remove the toilet tank lid and cover the toilet, tub and vanity top with plastic.
Fill nail and anchor holes with spackle, let it dry and sand it smooth. Then look along the tub, shower surround, vanity backsplash and trim. Cut out cracked or moldy caulk, clean the joint, let it dry, and run a fresh bead of paintable, mildew-resistant caulk. Let the caulk cure as long as the tube says before painting over it.
Step 3: Prime
Spot-prime every patch, every stain and any area where mildew was cleaned off. If the walls are glossy or have old oil-based paint, scuff them with fine sandpaper and prime the whole surface with a bonding primer. If you’re making a big color change, a tinted primer saves a coat of paint. Let it dry as long as the label says.
Step 4: Paint around the fixtures
Bathrooms are mostly cutting in: around the tub, the vanity, the mirror outline, the toilet and the tile. Work in this order:
- Ceiling first, with a moisture-resistant flat or matte ceiling paint, or the same satin as the walls in a very steamy room.
- Cut in the walls along the ceiling, tile edges, vanity and trim with an angled brush. Our cutting-in guide covers the technique.
- Roll the open wall areas with a 9-inch roller.
- Use a mini roller for tight spots: behind the toilet, between the vanity and the wall, above the tub surround and around the medicine cabinet.
- Paint the trim and door last, in semi-gloss.
To paint behind a toilet without removing it, use a mini roller on a short handle and a small brush. Some painters wrap a rag around a paint stirrer for the very back. It isn’t seen often, but unpainted patches behind the tank show up in photos and when cleaning.
Step 5: Second coat, then let it cure
Let the first coat dry for the recoat time on the can, longer in a cool or humid bathroom, then apply the second coat. Keep the exhaust fan running and the door open while the paint dries. After the final coat, wait before showering: at least a day for most latex paints, and preferably several days, because paint keeps hardening for a couple of weeks. When you do shower, run the fan during and for about 20 minutes after.
Is your exhaust fan up to the job?
Paint lasts in a bathroom only when the steam leaves quickly. A common rule of thumb from the Home Ventilating Institute is about 1 CFM (cubic foot per minute) of fan capacity for every square foot of floor, for bathrooms up to about 100 square feet. A 5 × 8 ft bathroom, at 40 square feet, needs a fan of roughly 50 CFM, the smallest common size. The fan’s rating is usually printed on a label inside the housing once the cover is off.
A few quick checks before you paint:
- Does it pull? Hold a sheet of toilet paper near the grille with the fan on. It should be drawn firmly against it.
- Where does it vent? The duct should run outdoors, not into the attic, where moisture can cause other problems.
- Is it used long enough? Running it for 20 minutes after a shower clears most of the steam; a timer switch makes that automatic.
If the fan is too weak or doesn’t vent outside, replacing it is worth considering before repainting, especially if paint has peeled before.
The bathroom ceiling
The ceiling above the shower takes the most steam of any surface in the house, and it’s where mildew and peeling usually start. Clean it thoroughly, prime any stained or mildewed area with a stain-blocking primer, and use a ceiling paint made for humid rooms, or the same satin bathroom paint as the walls in a shower room with poor airflow. Wear safety glasses, because ceiling work in a small room puts drips right at eye level.
Choosing colors for a bathroom
Bathrooms are usually small, often have little natural light, and are lit by bulbs right above the mirror, so colors look different than on a paint chip.
- Test samples under the vanity light you’ll use every morning, not just in daylight.
- Lighter colors make a small bathroom feel larger and reflect light onto your face at the mirror.
- Warm whites and soft colors are generally more flattering for skin tones under artificial light than stark cool whites or strong greens.
- Deep colors work beautifully in powder rooms, which are used briefly and where a dramatic look is welcome.
Our guide to choosing a paint color walks through testing samples properly.
Mistakes that make bathroom paint fail
- Painting over mildew. It grows back through the new paint. Clean it, let the area dry, and prime it.
- Skipping the caulk. Water gets behind paint through cracked caulk at the tub and vanity.
- Using flat paint. It absorbs moisture and can’t be scrubbed.
- Showering too soon. Fresh paint exposed to steam can blister or stay soft.
- Ignoring the fan. No paint survives a bathroom without ventilation; our articles on peeling and bubbling paint explain why.
How long does it take to paint a bathroom?
A small bathroom is a weekend job for most people, or one long day if the prep is done the evening before. Expect a few hours of cleaning, repairs and caulking (plus caulk curing time), an hour or two for the ceiling, and several hours of careful cutting in and rolling for two coats on the walls. The painting area is small, but nearly every edge is a cut-in line, which is what takes the time.
Frequently asked questions
What is the best paint finish for a bathroom?
Satin, in a paint made for bathrooms or high humidity. It resists moisture and can be wiped clean. Eggshell is fine in a powder room without a shower.
How much paint do I need for a small bathroom?
About one gallon for two coats on the walls of a typical 5 × 8 ft bathroom, plus a quart for the ceiling.
How long after painting a bathroom can I shower?
Wait at least a day, and longer if you can. Run the exhaust fan during and after the shower for the first few weeks while the paint cures.
Do I need special paint for a bathroom?
A paint labeled for bathrooms or high humidity with mildew resistance is the best choice, but good ventilation matters just as much as the paint.
Can I paint over mildew in a bathroom?
No. Clean the mildew off, let the surface dry, and prime it before painting, or it will come back through the paint.
Should I paint the bathroom ceiling the same color as the walls?
You can. In a small bathroom, painting the ceiling the same color, or a lighter version of it, can make the room feel taller. Use a flat or matte ceiling paint unless the room is very steamy.
Sources
- Method: standard trade practice for painting bathrooms; follow cleaner, primer and paint labels.
- Amounts: Brushwright calculation, 350 sq ft per gallon for walls and 400 for ceilings, two coats plus 10%, with typical tile areas subtracted.
Estimates only. The coverage printed on your paint can and the product instructions are the numbers to trust.