How Much Does It Cost to Paint a House Interior?

How Much Does It Cost to Paint a House Interior?

Hiring painters for a whole-house interior in the US typically costs about $2 to $6 per square foot of floor area, according to 2026 averages reported by NerdWallet, so roughly $4,000 to $12,000 for a 2,000 square foot home. Doing it yourself costs mainly paint and supplies: for the same house, about $1,700 for walls only or about $2,300 including ceilings, using mid-range paint, plus several weekends of your time.

The spread in professional prices is wide because “paint the interior” can mean walls only or walls, ceilings, trim and doors, and because labor rates vary a lot between cities. Below are the numbers by house size, what’s usually included, and how to get a quote you can compare.

The facts
Professional (US average)About $2–$6 per sq ft of floor
2,000 sq ft house, professionalAbout $4,000–$12,000
2,000 sq ft house, DIY paint and suppliesAbout $1,700 walls only; $2,300 with ceilings
Share of a pro job that is laborAbout 75–95% (Angi, via NerdWallet)

Cost to paint a house interior by size

The professional range uses the US average of $2 to $6 per square foot of floor area. The DIY columns assume mid-range paint at $50 per gallon, two coats, wall area of about 2.3 times the floor area (the ratio for a typical 12 × 12 ft room with 8 ft ceilings), and $250 to $300 of supplies.

Home size (floor area) Hiring painters DIY, walls only DIY, walls and ceilings
1,000 sq ft $2,000 to $6,000 About $1,000 (14 gal) About $1,350 (14 + 6 gal)
1,500 sq ft $3,000 to $9,000 About $1,350 (22 gal) About $1,850 (22 + 8 gal)
2,000 sq ft $4,000 to $12,000 About $1,700 (29 gal) About $2,300 (29 + 11 gal)
2,500 sq ft $5,000 to $15,000 About $2,100 (36 gal) About $2,850 (36 + 14 gal)
3,000 sq ft $6,000 to $18,000 About $2,450 (43 gal) About $3,350 (43 + 16 gal)

These are planning figures. Open-plan homes have less wall per square foot of floor; homes with many small rooms, high ceilings or stairwells have more. For a precise number, add up your rooms with the paint calculator, or price individual rooms with the cost to paint a room calculator.

How much paint does a whole house take?

As the table shows, a typical 2,000 square foot home needs roughly 30 gallons of wall paint for two coats, plus about 11 gallons of ceiling paint if you’re doing ceilings. Add primer for new drywall, patches or big color changes, and trim enamel if you’re painting trim and doors, often 2 to 4 gallons for a whole house. At this scale, buy in 5-gallon pails where you can; they usually cost noticeably less per gallon than single cans, and boxing several cans together gives consistent color throughout a room.

What a whole-house quote usually includes

A typical professional interior quote covers:

  • moving and covering furniture and floors,
  • minor prep: filling nail holes and small dents, light sanding, caulking small gaps,
  • two coats on the walls,
  • paint and materials, and
  • daily cleanup and a final walkthrough.

Items often priced separately or excluded:

  • Ceilings, which are slower to paint than walls.
  • Trim, baseboards and doors, which are brushwork and can add significantly to the price.
  • Repairs beyond small holes: cracks, water damage, texture repair.
  • Primer for new drywall, stains or dark-to-light changes.
  • Stairwells and high walls that need scaffolding or tall ladders.
  • Wallpaper removal and anything involving lead-safe practices in older homes.

Because labor is most of the price, the scope decides the quote far more than the paint. Our guide to the cost to paint a room has more detail on room-level pricing.

What makes a house more or less expensive to paint

Factor Effect on price
Ceiling height above 8 to 9 ft More wall area and ladder work
Many small rooms, closets and hallways More cutting in per square foot
Lots of trim, crown molding, wainscoting More slow brushwork
Wall condition Repairs and priming add hours
Color changes Dark-to-light or bright colors add primer or a coat
Occupied home with furniture More moving and protection time
Empty home, new construction Faster, often sprayed; usually cheaper per square foot
Location Big-city labor rates are higher
Season Interior work is often easier to schedule outside spring and summer

Canada

We haven’t found a reliable national average for interior painting costs in Canada, so we don’t publish one. Painters quote the same way, by area or by room, and the same factors apply. Paint and supplies are priced in Canadian dollars and paint is sold in 3.78 L cans and 18.9 L pails. Get several written quotes, then use the cost to paint a room calculator, which works in metric and Canadian can sizes, to sanity-check them room by room.

DIY vs hiring painters for a whole house

DIY saves the most money on a whole house, but it’s a big project. A first-timer usually needs about a day per bedroom for two coats including prep, and longer for kitchens, bathrooms and stairwells; our guide to how long it takes to paint a room has room-by-room estimates. A 2,000 square foot home can easily take six to ten full days of work spread over several weekends.

Hiring makes the most sense when:

  • you’re moving in or selling and the house needs to be done quickly,
  • the house has tall stairwells or vaulted ceilings,
  • walls need significant repair,
  • the home is older and may have lead paint, or
  • your time is worth more than the labor cost.

A hybrid often works well: paint the bedrooms and simple rooms yourself, and hire painters for stairwells, high ceilings and trim.

Costs people forget to budget for

Paint is the biggest DIY line, but a whole house brings extras that add up:

  • Primer for new drywall, repaired areas, stains and dark-to-light changes. Use the primer calculator for each room that needs it.
  • Trim enamel for baseboards, casings and doors, usually a few gallons for a whole house.
  • Repair materials: spackle, joint compound, mesh tape, caulk and sanding sponges.
  • Replacement roller covers and brushes: a whole-house job wears out several covers.
  • Ladders and access: a taller ladder or plank for stairwells, often rented.
  • Protection: extra drop cloths, plastic sheeting and painter’s tape for many rooms.
  • Your time: if you take days off work, that’s part of the real cost of DIY.

A cushion of 10 to 15 percent above your paint estimate covers most of these on a typical home.

Does premium paint pay off on a whole house?

On a whole-house job, paint quality matters more than it does for a single room, because coats and labor add up. A better paint usually hides in fewer coats, levels more smoothly and stands up to cleaning longer, which means fewer touch-ups and a longer time before the next repaint. If a premium paint saves even one coat across a whole house, it can save gallons and days of work. Where it matters least is ceilings and closets, where a good standard paint is usually enough.

Planning a DIY whole-house job

Painting a house yourself goes more smoothly with a plan:

  1. Do all the prep first, house-wide: fill holes, caulk and spot-prime every room before painting any.
  2. Group by color. Do all the ceilings in one pass, then all the rooms that share a wall color, then all the trim. You’ll open fewer cans and wash brushes less often.
  3. Start with rooms you can close off and do without for a day, such as spare bedrooms, and leave the kitchen, main bathroom and hallways for later.
  4. Finish with hallways and stairwells, since every other room’s traffic passes through them.
  5. Label leftover paint with the room, color, brand and sheen for future touch-ups.

Our guide to the order to paint a room covers the sequence inside each room, and the painting supplies checklist lists what to have on hand before you start.

Painting before you move in, or between tenants

An empty house is the cheapest and fastest one to paint. There’s no furniture to move or protect, painters can spray large areas, and you can do ceilings, walls and trim in one continuous pass. If you’re buying a home, try to schedule painting between closing and moving day; even a few days makes a big difference. For rental properties, a durable, washable eggshell in one neutral color throughout, with a single trim white, keeps turnover repaints quick and touch-ups simple, and stocking a labeled can of each color saves money at every move-out.

How to save money on a whole-house paint job

  • Empty the house first if you’re moving in. Painting before furniture arrives is faster and cheaper.
  • Do the prep yourself: remove outlet covers, take down pictures, fill nail holes and clear rooms, and ask for a lower quote.
  • Use fewer colors. One wall color for open areas and one trim white throughout saves time and paint.
  • Skip ceilings that don’t need it. Sound, clean ceilings can often wait.
  • Buy paint in 5-gallon pails for large areas.
  • Book outside peak season. Interior painters are often easier to schedule in late fall and winter; our winter painting guide covers doing it right.
  • Spray empty rooms. In a vacant house, an airless sprayer with back-rolling saves days; see our roller vs brush vs sprayer guide.

How to compare whole-house quotes

  1. Get at least three written quotes for the same scope: which rooms, walls only or ceilings and trim too, number of coats, and the paint product and line.
  2. Ask about prep: what repairs are included, and whether priming is.
  3. Check insurance and references, and in Canada, provincial workers’ compensation coverage.
  4. Ask about schedule and crew size, and whether you’ll need to move out of rooms for days at a time.
  5. Agree on a payment schedule. A deposit for materials is normal; paying everything upfront isn’t.
  6. Get the colors and product names in writing, so touch-ups later are easy.

Our upcoming guide to how much painters charge explains hourly, per-room and per-square-foot pricing in more detail.

Frequently asked questions

How much does it cost to paint the inside of a 2,000 sq ft house?

About $4,000 to $12,000 with professional painters in the US, based on $2 to $6 per square foot of floor area. DIY paint and supplies cost about $1,700 for walls only or $2,300 with ceilings.

How much paint do I need for a whole house interior?

For a typical 2,000 square foot home, roughly 30 gallons for two coats on the walls and about 11 more for ceilings. Homes with high ceilings or many small rooms need more.

Is it cheaper to paint a house interior yourself?

Yes, by a wide margin, because labor is most of a professional price. The trade-off is time: a whole house can take several weekends.

Does the price include ceilings and trim?

Often not. Many quotes cover walls only, with ceilings, trim and doors priced separately. Always ask.

How long does it take professionals to paint a house interior?

It depends on crew size and scope, but a crew can often paint a typical home’s walls in a few days to a week, longer with ceilings, trim and repairs.

When is the best time to paint a house interior?

Any time the home can be kept warm and ventilated. Late fall and winter are often easier for scheduling painters.

Sources

  • NerdWallet, Cost to paint a house in 2026: interior $2–$6 per sq ft; labor 75–95% of a professional job (Angi).
  • DIY figures: Brushwright calculation, wall area 2.3 × floor area, 350 sq ft/gal walls and 400 sq ft/gal ceilings, two coats plus 10%, $50 per gallon and $250–$300 supplies; replace with your local prices.

Estimates only. The coverage printed on your paint can and the product instructions are the numbers to trust.