How Much Paint Do You Need for Kitchen Cabinets?

How Much Paint Do You Need for Kitchen Cabinets?

Most kitchens need about one gallon of cabinet paint for two coats, plus roughly half a gallon to a gallon of primer. A small kitchen with around 15 doors can manage with less than a gallon of paint; a large kitchen with 30 doors needs about a gallon and a half. Cabinets have far less surface than walls, which is why the paint is the cheap part of the job and the preparation is the expensive one.

People often buy two or three gallons for a kitchen and end up with most of it in the garage. Here’s how to get the amount right, and the parts that matter more than the quantity.

The facts
Average kitchen, 2 coats of paintAbout 0.9 gal: buy 1 gallon
Primer, 1 coatAbout half a gallon to a gallon
Cabinet enamel coverageAbout 400 sq ft per gallon on smooth, sanded surfaces
What takes the timeCleaning, sanding, priming and drying

How much paint for small, average and large kitchens?

We used the same method as our cabinet paint calculator: both sides of each door at about 3.1 square feet per side for a standard 15 × 30 inch door, about 0.75 square feet per drawer front, and about 1.5 square feet per foot of cabinet run for face frames and end panels. Two coats of paint at 400 square feet per gallon and one coat of primer at 350, each plus 10%.

Kitchen Doors / drawers / run Surface Paint, 2 coats Primer, 1 coat
Small (galley or condo) 15 / 6 / 15 ft About 120 sq ft 0.7 gal: buy 1 gallon (or 3 quarts) 0.4 gal: buy 2 quarts
Average 20 / 8 / 20 ft About 160 sq ft 0.9 gal: buy 1 gallon 0.5 gal: buy 2 quarts to 1 gallon
Large, with an island 30 / 12 / 30 ft About 240 sq ft 1.3 gal: buy 1 gallon + 2 quarts 0.8 gal: buy 1 gallon
Bathroom vanity 2 / 3 / 5 ft About 22 sq ft 0.1 gal: buy 1 quart 1 quart

If you’re painting only the outside of the doors, the paint drops by roughly a third. If your doors are larger than standard, or you have tall pantry doors, use the calculator, which lets you count doors and drawers and choose a door size.

How to count your cabinets

  1. Count the doors, including small ones above the fridge and over the stove.
  2. Count the drawer fronts. Include false fronts under the sink.
  3. Measure the run: the total length of upper and lower cabinets, added together, plus any island.
  4. Decide whether you’re painting the backs of the doors. Most people do, so the inside looks finished when doors are open.
  5. Note any glass doors, open shelves or end panels, which add or remove a little surface.

That’s all the calculator needs, in feet or meters.

Why so little paint goes so far

An average 12 × 12 ft bedroom has over 330 square feet of wall. An average kitchen’s cabinets, doors front and back, have about half that. And cabinet enamel goes on in thin coats over a smooth, sanded and primed surface, so it covers efficiently. Buying a gallon for a typical kitchen leaves enough for touch-ups, which you’ll want: cabinets take more knocks than any wall.

Do you need primer on cabinets?

Almost always. Kitchen cabinets are some of the hardest surfaces in a house to make paint stick to: factory finishes, lacquers, old oil paint and years of cooking grease all resist new paint. Skipping primer is the most common reason painted cabinets chip and peel within a year.

  • Painted or finished wood: degrease, scuff-sand, then a bonding primer.
  • Bare wood, especially oak: a stain-blocking primer. Oak’s open grain shows through paint; if you want a smooth look, use a grain filler or a high-build primer and sand between coats.
  • Old oil-based paint: sand and use a bonding primer. Our latex vs oil guide shows how to test what’s on there.
  • Laminate or thermofoil: a bonding primer made for slick surfaces, after a light scuff. Peeling thermofoil can’t be painted reliably and is better replaced.

Our primer guide explains each primer type.

What paint to use on cabinets

Use a paint made for cabinets, trim and doors, not ordinary wall paint. Wall paint stays relatively soft and can stick when doors close against frames. Look for:

  • Water-based or hybrid (urethane-modified alkyd) enamel. They level out to a smooth finish, cure hard, clean up with water and don’t yellow like traditional oil paint.
  • Satin or semi-gloss sheen. Semi-gloss is the most durable and easiest to wipe; satin looks softer and shows a few less flaws. See our paint sheens guide.

Brush, roller or sprayer?

For most DIY kitchens, a good angled brush for the details and a small 4 to 6 inch foam or fine microfiber roller for the flat panels gives a very smooth result. A sprayer, especially an HVLP sprayer, gives the most factory-like finish on doors and drawers, but you need a dust-free place to lay out the doors and you’ll lose some paint to overspray; buy a little extra if you spray. Our comparison of rollers, brushes and sprayers goes into the trade-offs.

The real work: prep and time

The paint takes a gallon; the job takes days. A realistic plan for an average kitchen:

  1. Day 1: label and remove doors, drawers and hardware; degrease every surface with a cleaner made for removing grease; rinse and dry.
  2. Day 1 to 2: fill dents and old hardware holes if you’re changing handles; scuff-sand everything; vacuum and wipe off dust.
  3. Day 2: prime boxes, doors and drawers; let it dry as long as the label says, then lightly sand any raised grain.
  4. Days 3 to 4: first and second coats of paint on one side of the doors, then the other, respecting the recoat time between coats. Our guide to how long to wait between coats covers this.
  5. Following days: let the paint harden before rehanging doors and using the cabinets heavily. Many cabinet enamels feel dry in hours but need days to weeks to cure fully; treat them gently for the first couple of weeks.

Cabinet colors that hide wear

Kitchen cabinets get grabbed, kicked and splashed every day, and color choice affects how quickly that shows.

Color family How it wears Good for
Pure, bright white Shows grime around handles and on lower doors Kitchens that get wiped often
Warm off-white, greige Hides light smudges better than bright white Busy family kitchens
Mid-tone greens and blues Hides fingerprints and dust well Lower cabinets, islands
Navy, charcoal, black Shows dust, scratches and chips as light marks Islands or uppers rather than lowers

A popular compromise is a lighter color on the uppers and a mid or deep tone on the lowers and island, where most of the wear happens.

Hardware, hinges and labels

  • Label everything before you start. Number each door and its opening with painter’s tape inside the hinge recess, and keep each door’s screws in a matching labeled bag.
  • Changing handles? If the new handles use different hole spacing, fill the old holes with a two-part wood filler, sand flush and prime before painting.
  • Don’t paint hinges in place. Remove them or mask them; paint on hinges cracks and makes doors stick.
  • Rehang only when the paint is hard enough, usually after at least a day, and add soft bumpers so doors don’t stick to fresh paint on the frames.

How long painted cabinets last, and touching them up

Well-prepared, primed cabinets painted with a cabinet enamel can last for years, but the edges of the most-used doors will eventually show wear. Keep the leftover paint, labeled, and touch up chips with a small artist’s brush. Thin coats blend best; build up a chip with two or three light touches rather than one thick dab.

Should you paint the inside of the cabinets?

Usually not. The interiors of most cabinets are a factory finish or melamine that holds up well, and painting them adds a lot of surface, a lot of drying time and a finish that can stick to dishes and scrape off when you slide things in and out. The exceptions are glass-front cabinets and open shelving, where the inside is on display; there, paint the interior in the same color, or in a contrasting one as a design detail, and let it cure fully before loading it. If you do, add the interior area to your count in the calculator, because it can almost double the surface for those cabinets.

Boxes, edges and the toe kick

The doors get the attention, but three other areas decide whether the job looks finished:

  • Face frames: paint these in place after cleaning and scuff-sanding, using a small brush for the inside edges and a mini roller for the flat faces.
  • Door and drawer edges: these take the most wear. Give them a full, even coat each time and let them dry before the second.
  • The toe kick: the recessed strip at floor level gets kicked and mopped. Many people paint it a darker color than the cabinets, or the same deep color as the floor, so scuffs don’t show.

Work the boxes first, then the doors, so you can rehang each door on a frame that’s already finished.

Frequently asked questions

How much paint do I need to paint kitchen cabinets?

About one gallon for two coats in an average kitchen with around 20 doors, plus about half a gallon to a gallon of primer. Small kitchens may need less than a gallon of paint.

How many coats of paint do cabinets need?

One coat of primer and two coats of paint. Very dark or very light color changes may need an extra coat of paint.

Can I use wall paint on cabinets?

It’s not recommended. Wall paint stays softer, scuffs easily and can stick when doors close. Use a cabinet and trim enamel.

Do I have to sand cabinets before painting?

Yes, at least a light scuff-sand after degreasing, so the primer can grip. Some bonding primers reduce the sanding needed, but rarely eliminate it.

How long does it take to paint kitchen cabinets?

Usually three to five days for an average kitchen, most of it prep and drying time, plus a curing period before heavy use.

Is one quart enough for a bathroom vanity?

Yes. A typical vanity with two doors and a few drawers needs well under a quart for two coats.

Sources

  • Amounts: Brushwright cabinet calculator method; door and frame areas are standard estimates for typical North American cabinets.
  • Product guidance: manufacturer recommendations for cabinet enamels and bonding primers; follow the label for your products.

Estimates only. The coverage printed on your paint can and the product instructions are the numbers to trust.