Paint Sheens Explained: The Best Finish for Every Room

Paint Sheens Explained: The Best Finish for Every Room

Paint sheen is how much light the dried paint reflects. From least to most shiny, the common finishes are flat, matte, eggshell, satin, semi-gloss and gloss. The shinier the finish, the easier it is to wipe clean and the better it resists scuffs, but the more it shows dents, patches and roller marks. That’s why most walls get matte or eggshell, busy rooms get satin, and trim and doors get semi-gloss.

One warning before the details: sheen names aren’t standardised between brands. One maker’s eggshell can look like another’s satin. When it matters, compare the gloss number on the technical data sheet, or look at a painted sample.

The facts
Most forgiving on wallsFlat or matte
Most popular for wallsEggshell
Kitchens and bathroomsSatin
Trim and doorsSemi-gloss

The sheens, from flat to gloss

The Master Painters Institute (MPI) defines seven gloss levels with measured ranges, and many manufacturers, including Canada’s Cloverdale Paint, formulate products to those levels. Gloss is measured with a meter that bounces light off the paint at 60 degrees; higher numbers mean shinier.

Common name MPI gloss level Gloss at 60° Looks like Durability and cleaning Hides flaws
Flat 1 Up to 5 units No shine at all Lowest; marks easily, hard to scrub Best
Matte / velvet 2 Up to 10 units A soft, chalky glow at low angles Better than flat; many modern mattes are washable Very good
Eggshell 3 10 to 25 units A low sheen, like the shell of an egg Good; wipes clean Good
Satin 4 20 to 35 units A soft, pearly glow Very good; scrubbable Fair
Semi-gloss 5 35 to 70 units Clearly shiny Excellent; stands up to knocks and cleaning Poor
Gloss 6 70 to 85 units Reflective Excellent Very poor
High gloss 7 Over 85 units Mirror-like Excellent Shows everything

Notice the overlap between eggshell (10 to 25) and satin (20 to 35). It’s the reason two brands’ versions of those names can look almost the same.

Why shinier paint is tougher, and less forgiving

In simple terms, flatter paints contain more pigment and fillers relative to binder, which scatters light and gives a soft, non-reflective surface. Glossier paints have more binder, which forms a smoother, harder film. That smooth film reflects light, sheds dirt and survives scrubbing, but because it reflects light so evenly, any dent, patch or uneven roller stroke stands out.

The practical consequences:

  • Touch-ups blend best in flatter finishes. A dab of matte paint disappears; a dab of satin often shows as a shiny spot.
  • Imperfect walls look better in flatter finishes. Old plaster, patched drywall and textured walls are kinder to matte than to satin. Our guide to painting textured walls covers this.
  • High-traffic surfaces last longer in glossier finishes. Hallways, kids’ rooms, kitchens and trim get handled and wiped.

Flat and matte

Flat paint has almost no shine. It hides surface flaws better than anything else and gives colors a rich, velvety depth, which is why it’s the classic choice for ceilings. The traditional drawback was durability: marks were hard to wash off. Many modern matte paints are formulated to be washable, which has made matte a popular choice for living rooms, dining rooms and bedrooms where walls don’t get much abuse.

Eggshell

Eggshell is the most common wall finish in North American homes for good reason. It has just enough sheen to wipe clean and resist light scuffs, while still hiding most minor wall imperfections. If you’re unsure, eggshell is the safe choice for bedrooms, living rooms, hallways and family rooms.

Satin

Satin has a noticeable soft glow and is tougher and more moisture-tolerant than eggshell. It’s the usual choice for kitchens, bathrooms, laundry rooms, mudrooms and kids’ rooms, where walls get splashed, steamed or scrubbed. The trade-off is that it shows roller marks and wall flaws more, so careful prep and an even rolling technique matter.

Semi-gloss and gloss

Semi-gloss is the standard for trim, doors, window frames and cabinets: surfaces that are touched, bumped and cleaned often. It’s very durable and easy to wipe, but it shows every brush stroke and imperfection, so sand and prime well. Gloss and high gloss are mostly used for statement doors, furniture and lacquer-like trim; they look striking and demand near-perfect preparation.

Best paint finish for each room

Room or surface Best sheen Why
Ceilings Flat Hides flaws and doesn’t reflect light into your eyes
Living room, dining room Matte or eggshell Rich color, forgiving, low wear
Bedrooms (adults) Matte or eggshell Calm look, little wear
Kids’ rooms and playrooms Eggshell or satin Wipes off crayon and fingerprints
Hallways and stairwells Eggshell or satin Hands, bags and scuffs
Kitchen walls Satin Grease and splashes wipe off
Bathrooms Satin Handles humidity and cleaning
Laundry room, mudroom Satin or semi-gloss Moisture and heavy use
Home office Matte or eggshell Little wear, less glare on screens
Basement (finished) Eggshell or satin Moisture tolerance and cleaning
Trim, baseboards, window casings Semi-gloss Knocks, cleaning, crisp contrast with walls
Interior doors Semi-gloss Handled constantly
Kitchen and bathroom cabinets Semi-gloss or satin enamel Hard, wipeable finish
Front door Semi-gloss or gloss Durability and a little drama

A few rules of thumb sit behind the chart. Where walls get wet or dirty, go one step shinier. Where walls are uneven or old, go one step flatter. And where you want walls to recede and colors to look rich, choose matte.

Mixing sheens in one room

The classic combination is flat ceilings, eggshell or satin walls, and semi-gloss trim. The contrast in sheen is part of what makes trim look crisp, even when it’s painted the same color as the walls. If you paint walls and trim the same color, using a glossier finish on the trim still separates them subtly.

Don’t mix sheens on the same surface. Touching up an eggshell wall with satin, or painting one coat in each, leaves patches that shine differently whenever the light changes. If you don’t know the existing sheen, look at the wall from a low angle near a window, or check the original can if you have it.

Does sheen change how much paint you need?

Not much on walls. Coverage per gallon is similar across sheens of the same product line, so use the same amounts as in our guide on how much paint you need for a room, or the paint calculator. Glossier paints do show thin spots more, so two full coats matter even more with satin and semi-gloss; see how many coats of paint you need.

How sheen affects color

The same color looks slightly different in different sheens. Flatter finishes make colors look a little deeper and softer; glossier finishes reflect more light, so colors can look slightly lighter and more vivid, and they pick up reflections from windows and lamps. If you’re matching an existing color, match the sheen too. And when testing a color, test it in the sheen you’ll actually use.

How to tell which sheen is already on your wall

If you’re touching up or matching a finish and don’t have the old can, you can usually work it out in a minute:

  1. Look along the wall at a low angle toward a window. Flat and matte show almost no reflection; eggshell shows a faint glow; satin shows a soft but clear reflection of the window; semi-gloss shows a sharp one.
  2. Rub a fingertip across it. Flat paint feels chalky or slightly rough; satin and glossier finishes feel smooth and slick.
  3. Wipe a small spot with a damp cloth. Flat paint often darkens or burnishes; satin and above wipe clean without changing.
  4. Compare with a sample card. Many paint stores have sheen sample cards; hold one next to the wall in daylight.

When in doubt between two neighbors, such as eggshell and satin, choose the flatter one for touch-ups. A slightly flatter patch is much less noticeable than a slightly shinier one.

What each sheen can handle

Sheen Light dusting Wiping fingerprints Scrubbing Steam and splashes
Flat Yes Carefully No No
Matte (washable lines) Yes Yes Gently Limited
Eggshell Yes Yes Gently Limited
Satin Yes Yes Yes Yes
Semi-gloss Yes Yes Yes Yes

The exact limits depend on the product, so check the label for scrub ratings. As a rule, let any paint cure for a couple of weeks before cleaning it at all.

Frequently asked questions

What is the most popular paint finish for walls?

Eggshell. It’s wipeable enough for everyday living and still forgiving of minor wall imperfections.

Is eggshell or satin better for a bathroom?

Satin, in most bathrooms. It handles humidity and frequent cleaning better than eggshell. In a powder room without a shower, eggshell is fine.

Is matte paint washable?

Many modern matte paints are washable, especially premium lines. Older or budget flat paints are not. Check the label for scrub or wash ratings.

What sheen should trim be?

Semi-gloss, in most homes. It’s tough, easy to clean, and contrasts nicely with flatter walls. Satin works if you prefer a softer look.

Why does my wall look patchy after touching up?

Usually because the touch-up paint is a different sheen, or the original paint has aged and changed slightly. Flatter finishes hide touch-ups better; with satin and glossier paints, repaint the whole wall corner to corner.

Are sheen names the same across brands?

No. One brand’s eggshell may be close to another’s satin. Compare gloss numbers on the technical data sheets or look at painted samples.

Sources

  • Cloverdale Paint, Paint sheen levels: the seven MPI gloss levels and why sheen names vary between manufacturers.
  • Rodda Paint, Selecting gloss level: MPI gloss and sheen measurement ranges at 60° and 85°.

Estimates only. The coverage printed on your paint can and the product instructions are the numbers to trust.